Curved perforated carbon fiber shell reference.
Un capot de robot ne se résume pas à une forme extérieure adaptée. Ses ouvertures, ses points de fixation et son chemin de démontage doivent permettre le montage et l'entretien de l'équipement sans endommager les câbles ni le capot.
Map access in the assembled position
Mark the connectors, cable exits and service points behind the cover. Include the space needed for tools and hands, not just the nominal opening. For a split cover, identify the parting line and the order in which the sections are fitted.
Use the sample to test the service sequence
Review the cover with the intended fasteners and surrounding hardware in place. Record whether the cover can be removed without disconnecting unrelated parts. A shaped carbon fiber shell shown in a catalogue is a geometry reference; it does not demonstrate guarding, electrical or machine-safety compliance.
Exemple de scénario
A connector fits through an opening, but its locking tab cannot be reached once the cover is installed. Review the connector’s operating space and the cover-removal sequence, not only the opening dimensions. Record the access check on the sample report.
Points à noter
| Cable exits | Show cable paths and connector access envelopes. |
|---|---|
| Removal sequence | Define which fasteners and adjacent parts are removed. |
| Sample trial | Record fit, access and edge treatment with the assembly. |
Lectures complémentaires
- Lignes de joint et bords moulés : analyse d'une coque en fibre de carbone sur mesure
- Inserts dans les pièces en fibre de carbone : définir l'insert et sa position
Référence contextuelle : Gurit — Matériaux composites.
Discuter des exigences relatives aux composants
Veuillez nous envoyer le plan de la pièce et les spécifications pertinentes pour ce guide afin que nous puissions en examiner la portée.
Contacter Litian Yunde